Bradley SS-2/IR/STD Installationshandbuch PDF herunterladen (Seite 9)

Express® Lavatory System SS-Series

Installation Instructions SS-2N/IR/STD, SS-2N/IR/WH

Bradley Corporation • 215-1497 Rev. B; EN 03-808A 4/16/04

Installation Instructions

continued . . .

Step 4: Connecting supply and drain

1. Loosen but do not remove the two mounting screws holding the valve bracket to the frame. Slide

the valve bracket up until the larger cutout in the frame’s slot aligns with the screw head (see

Figure 5c). Then lift up to remove the valve bracket from the frame.

2. FOR HOT AND COLD SUPPLY: Using a thread sealer, thread the stop/check valve onto the hot

and cold wall stub-outs (see Figure 5a). Attach one end of the 1/2" flexible hose to the

Vernatherm™ valve (one hose on the hot side, the other hose on the cold side) (see Figure 5a).

Attach the other swivel end to the stop/check valve (located on the wall stub-out).

NOTE: The letter “H” on the Vernatherm™ Mixing Valve indicates hot water supply inlet.

FOR SINGLE TEMPERED SUPPLY: Using a thread sealer, thread the stop/check valve onto the

wall stub-out. Attach one end of the 1/2" flexible hose to the tempered line adapter and the other

end to the stop/check valve located on the wall stub-out (see Figure 5b).

3. Install the drain plug in the drain hole in the bowl (see Figure 5d).

4. Beneath the bowl, install the 1/8" rubber washer and the threaded tailpiece onto the drain plug.

5. Assemble the P-trap by connecting the 1-1/2" tubular pipe to the tailpiece and to the 1-1/2" drain

pipe stubbed out of the wall (see Figure 5e).

6. Install the strainer on the drain plug opening inside the bowl using the #8 screw.

Figure 5d

Figure 5a

Figure 5b

STRAINER

BOWL

1/8"

RUBBER

WASHER

DRAIN

PLUG

TAILPIECE

#8 SCREW

P-TRAP

STRAINER

TAILPIECE

FRAME

(FRONT)

45˚

Figure 5e

FLEXIBLE

SUPPLY

HOSE

269-1735

VERNATHERM™

THERMOSTATIC

MIXING VALVE

S01-520

CONNECT TO

1/2" NPT HOT

WATER SUPPLY

CONNECT TO

1/2" NPT COLD

WATER SUPPLY

FLEXIBLE

SUPPLY

HOSE

269-1735

TEMPERED

LINE ADAPTER

153-432

CONNECT TO

1/2" NPT

WATER SUPPLY

Figure 5c

SLOT IN

FRAME

VALVE BRACKET

MOUNTING SCREW

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare

Bradley SS-2/IR/STD Installationshandbuch Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sanitärkeramik Bradley SS-2/IR/STD