Bradley HN-400 Bedienungsanleitung PDF herunterladen (Seite 10)

SWF Companies Parts Illustrations (Standard)

TF 400V/600V 10 of 62 9/24/2004

Additional Safety Notes

• Examine the frame and machine surfaces for abraded surfaces and sharp edges. File any sharp

edges or surfaces smooth and cushion them against collision if the machine is near employee

traffic patterns.

• Turn the main power switch to the “OFF” position before removing any guards at a drive or nip

point.

• All guards and safety devices (interlocks) as manufactured and installed at the factory must be

reinstalled after maintenance and before machine start-up.

• Maintenance personnel should always use protective measures to avoid contact with hot surfaces,

resins, glue, or wax during clean up or repair of the adhesive system.

• The adhesive melt pots are provided with a temperature regulator. Turn the machine main

electrical disconnect off at the end of each workday.

• Guards mounted at the factory protect the operator from drive units, nip points, and contact with

electrical circuitry.

• All guards for the lower transmission, feed post, and program feed wheel must be securely in place

before operating the machine.

• All guarding must always be in place while operating. Take extreme caution while making

adjustments or size changes with the guards removed.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 61 62

Keine Kommentare

Bradley HN-400 Bedienungsanleitung Seite 10